It Kills Rust

We are YOUR SOURCE for ALL POR-15 products

HOME - It Kills Rust
POR-15 FAQS
Rust Prevention

POR-15 Paints
Cleaner/Degreaser
Metal Preparation
Floor Coatings
Floor Armor - Accessories
Topcoats
Clear Coats
Hardnose Paint
Color Chrome
Engine Paints
Body Fillers
Fuel System
High Temperature
Primer
Epoxy Putty
Complete Kits
Accessories
Finishing Products
Care Products
Website Specials

STOP RUST PERMANENTLY!

Use the proven product that hobbyists, car magazine editors & professional restorers have been using since 1980!

Unlike ordinary paints, POR-15 is designed to be coated right onto rusty surfaces, leaving a beautiful, rock-hard finish that won’t crack, chip or peel. Use it to coat a rusty frame, floor pans, farm equipment, underwater marine items, or even a heavily corroded battery tray, and stop rust permanently in its tracks!

The secret lies in the POR-15 curing process. Unlike paint, POR-15 cures by drawing moisture from the atmosphere. Paint, on the other hand, cures through the process of solvent evaporation through pores (that’s why you can smell a paint job for weeks). Those same pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal. POR-15 is so tough, that some folks describe it as Powder coat in a can. Use it on your chassis, and you’ll be surprised as how little effect gravel roads have on the finish. In fact, off-road enthusiasts and dirt bake racers use it on their frames and under-carriages, where NO paint can survive. Furthermore, POR-15 is very flexible, and can withstand much twisting and bending without cracking. Use POR-15 on anything you want to permanently protect from rust, stone chips or other common paint failures.

Farm, industrial, marine commercial and construction industries all use POR-15 to protect expensive and valuable equipment against rust, abrasion, and even graffiti. POR-15 also has excellent surface tolerance, which means it works very well on porous surfaces, such as wood, fiberglass, concrete, and bricks. Try some for yourself!

Featured POR-15 Products
Click on photo or product name to order.

Protect wheels, bumpers, & other bright metal with the toughest clear coat available anywhere!

GLISTEN PC is a high gloss, rock hard, water-clear topcoat that was engineered especially for use in difficult applications. GLISTEN PC bonds to polished aluminum, chrome, brass, and stainless steel like no other product you have ever tried. It’s also terrific over existing paint—even very glossy surfaces.

Spray or brush GLISTEN PC it won’t leave brush marks, and dries in less than 1 hour (reaches maximum hardness in a couple days). Once fully cured, it won’t crack, chip, or yellow and maintains a high level of flexibility.

GLISTEN PC utilizes high solid, moisture-curing urethane technology, setting new performance standards in adhesion, corrosion protection, flexibility, and UV stability. GLISTEN PC is strengthened by exposure to moisture, and tensile strength is 2 to 3 times that of most other clear coats. Also available in semi-gloss.

PELUCID™ is one of the most advanced single component clear coats in the world. It's super clear, super glossy, and unbelievably tough!

Spray or brush this non-yellowing single-component clear coat over painted or unpainted fiberglass, wood, and other interior surfaces that need a clear lustrous finish. The tough, yet flexible, coating dries clear as water, with a rock-hard finish that won't crack, chip, or peel.

It's self leveling, which means it won't leave harsh brush marks. It can be recoated in 2 to 3 hours, depending on humidity, and will withstand temperatures up to 400 F. Two coats should always be applied, to achieve maximum beauty and protection.

PELUCID™ has excellent adhesion qualities, and is highly chemical resistant. Check it out yourself!

METAL-READY™ provides the best adhesion for POR-15® on any surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion.
After thoroughly degreasing your work piece, apply environmentally safe METAL-READY® to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® or any other paint. METAL-READY® is not caustic, corrosive, toxic or flammable.

Features: • Easy to use - One-Step Process • Coats Metal with Zinc Phosphate
• No Harmful Residues • Insures Perfect Paint Adhesion
• Is Re-Usable • Provides Perfect Base for All Paints
• Removes Surface Rust in Minutes! • Gives Better Welding Conductivity